The DDB-100 is specially designed for the laser scanning with littlelight-weight spot, giantoperatingvary and high flexibility and options 100W RF metal laser tube imported from USA, advanced dynamic focusing scanning mirror & management card.
Wooden engraving is usually used in die-boards, wood models, wood joint boards, engraving clothes rack, wood photo frame, and others. Wood plates are classified into plywood, solid wood, MDF and the plywood is the widest application. Usually, plywood includes three specifications: 3mm, 5mm and 7mm. all these materials can be cut by laser cutting machine. The normal speed to breakdown 3mm plywood is 1.2 meters per minute and some solid wood can be cut to 10mm. Details are determined by actual situation. 63.5mm focusing lens is better for cutting of 6mm die-board and the speed is 0.2-0.4 meter per minute, the optical density 75-80%. Addition with strong air pump or air compressor, the effect will be better. Usually, the thickness of wood model is below 3mm and the speed is 0.5-1.2 meters per minute. Wood joint boards are usually cut with double focus mirrors and choice of RF laser diode is advised for customers of high requirements for its exquisite beam spot and incision. Small area engraver is advised for clothes rack engraving. The speed is determined by the size of the wood plate to be engraved and the effect to be achieved. For dark engraving effect, defocus engraving can be employed. The power of the air pump will influence the degree of burning.
Cutting and engraving of hot production drilling template: hot production drilling template are various and the common materials include: hot drilling paper, Engraving (density board) or acrylics. 50mm focusing lens is usually adopted for cutting of hot production drilling template. Turn on the air blow machine and exhaust fan to absorb the template evenly on the honeycomb and there is no specific requirements to the cutting parameters and processing technologies. Since the graphics at the cutting position is not too big, the speed is usually 0.5-3.5 meters per minute and the optical density 18-40. Enhance the air blow as much as possible to decrease the color change of the incision. The speed of engraving hot production drilling template is 10 meters per minute and the optical density is 35%, resolution over 600 dpi. The actual parameters should be determined by the size of the hot drill. The bigger the drill, the greater the thickness and the deeper the engraving are. Laser machine can be adopted for rubber plate engraving. Generally, the 50mm focusing lens and PLT and BMP format are chosen. PLT is mainly used for edge engraving. Each format has its own advantages and it should be analyzed according to the actual case. If the height of the character to be engraved is over 10mm or the width of the line is over 1.5mm, the edge engraving method can be chosen. Take the first 7mm single layer common rubber plate for example, when edge engraving, wet newspaper should be laid on its surface and leaking air ejector should be used. Strong air blow that can uplift the newspaper should be avoided. In this way, the line engraved will be more exquisite. The speed for such circumstance is usually 0.5-0.8 meters per minute and the higher the speed, the bigger the saw tooth is. The optical density should be between 20%-50%. It should be adjusted according to the depth. If it’s deeper, the optical density can be adjusted to 60%-70%. And for double layer rubber plates: the optical density depth should reach 1.5mm for 4mm double layer rubber plate and the speed should be adjusted to 0.5 meters per minute with optical density of 45%. It should be determined by actual conditions. If the height of character to be engraved is lower than 10mm, the method of engraving can be adopted and the speed is generally 10-15 meters per minute, the optical density is generally adjusted to 18%-28% of the total depth and the optical density depth is generally 55%-75%, the gradient is between 0.8-1.5, and the resolution is 500-600dpi. The denser or the smaller the characters, the smaller the optical density and the gradient will be set.
Eastern laser is known for its software “SmartCarve 4.3”, this new version can engrave plastic, high-end absolute black marble and green marble plaques, and its high-end award trophies made of absolute black marble, onyx and colored crystal.
Your vision, coupled with Eastern equipment will allow you to bring your creative visions to life. From creating custom award and recognition keepsakes to rapid prototyping to custom marking consumer products.The highest resolution engraving, guarantee your customers that you prodive only the best genraving by using an Eastern Laser;Eastern Laser machine will create a higher detail mark in less time than any other system on the market by using the highest-quality mechanics.
The key to Eastern laser’s success is our commitment to quality, service, selection, and value for the customers.Eastern work with more than 4000 clients around the world, and many of them tell us that it is the coaches or parents who influence buying decisions. In some cases there may be a committee, but normally, from what our customers tell us, it is a one person decision.
Eastern provide excellent customer service, and we are willing to turn out medals in one day in emergency situations if we are able to. Our customers also appreciate that we are willing to source items for them even if we do not offer them here, we are able to help our customers find what they are looking for.
While we change the laser cutting machine products in our catalog from year to year, we don’t typically remove items from our product line. We are always willing to try to find a way to supply our customers with whatever they need, and a lot of times, what they are looking for is above and beyond what list in our catalog or on or website.
Our customers expect quality. We deliver it consistently and they can count on it. Their reputation is their brand. They need to count on a supplier that builds their name and their reputation.
Lasers are high concentrations of light that can penetrate matter. Depending on your industry, you may want to invest capital in purchasing a laser cutting machine. Lasers utilize high concentrations of light that penetrate physical objects. Lasers are often lauded for their pin point accuracy and clean cut compared to physical tools. However, the market is flooded with different types of laser cutting machines that are meant for different purposes. Some machines are excellent for artistic reasons, while others are purely used for manufacturing.
Learn about the material you will use for the laser cutting machine. Some materials require weaker lasers, such as fiberglass, while metals need strong lasers.
Focus on the type of work you want to use the laser for. Some laser machines have computers and computer software that can scan images and then laser cut the scanned image onto material. If this is something you want to invest in, buy a machine that can do that.
Investigate how much of a power scale you want. Some lasers are light in their penetrative powers, while others utilize the entire wattage of power given to them. If you want lasers for artistic purposes, you may want a lighter laser. For manufacturing purposes, you might need a laser powerful enough to penetrate certain metals.
Determine the focus level you want in your machine. Some laser cutting machines have a large scale of measurements for their cutting. This allows you know how deep and wide you want your laser cuts to be. A machine with many settings is probably preferred.
See what the pulses per inch is on the device. Pulses per inch is a measurement on how many laser pulses are afflicted to the material. Since lasers do not flow in a straight line, a machine needs to pulse lasers out at a certain rate. The higher the rate, the faster the machine.
Contact the manufacturer directly. Since laser cutting machines utilize delicate machinery, only a manufacturer or laser selling company can give you a machine.
Laser engraving machines have many advantages over traditional engraving methods like sand blasting, diamond cutting or chemical etching. They can cut, mark and engrave plastic, metal, wood, glass, stone, ceramic, rubber, acrylic, textiles and many other materials quickly and easily. By not physically touching the material, laser engraving machines do not wear down and have lower maintenance costs than the other methods. In addition, these engraving machines do not require harsh chemicals which can be expensive and troublesome to dispose. When paired with a computer, laser engraving machines can become a powerful and convenient design tools. The computer treats the laser engraving machines as if they were printers and allows the user to use scanners or common drawing software to make new designs. Modern laser engraving machines are now more compact and cheaper than ever before.
The first decision to make when you are in the market for laser engraving machines is the maximum size of the materials to engrave. The larger the size, the more expensive the system. As It can be very frustrating to consistently not be able to realize your designs because the objects are too big for your machine, you should invest in the largest size that will often use.
The next decision is to determine how fast of a system you need. The speed of the laser engraving machines is directly proportional to the power of the laser. If you have to do many engravings at a time, it may be worth the extra money to get a faster engraving machine. On the other hand if you only do one or two pieces at a time and can wait for them to process, a cheaper system may be more than suitable. Finally you should consider that if you are also interested in cutting materials, a more powerful laser can cut more materials.
Look for servo motors or high precision motors and enhanced laser options if you need fine detail etching. If you are working with small objects with very fine engravings, better motors give the computer more precise control during the etching process. Beam enhancing optics makes the laser beam more precise. The auto focus capabilities allow the laser to adjust its focus on on curved or irregular surfaces.
Many engraving systems have a light that shows exactly where the laser is pointing. This is very useful during the engraving process as it allows you to watch the laser cut and determine if the the result is what you expected. This is becoming a very common feature on most laser engraving machines, but it is not always available on the older models.
Consider whether you want an air blowing system, which puffs cool air across the material as the laser cuts. The process removes debris and smoke during the etching process. It is standard on many systems, but not on all. However, it is critical safety feature when cutting things like acrylic or other flammable materials.
Consider whether you need an integrated vacuum table to hold thin materials flat so they do not curve during processing.This feature is critical for cutting thin plastic, wood aluminum or any material that can warp or curl. It is not very useful if you plan to only cut thick or bulky items.
This water cooling machine is especially designed for laser cutter and can provide the stable precise water temperature control for the path of rays. Eastern Laser water cooling machine is best choice for laser water cooling. This product technical performance has achieved the international advanced level.
A water cooling system for the laser machine is included with every laser machine Eastern Laser sells. This maintains an even operating temperature in the laser and therefore the steady power output critical for high quality engravings.
Features of Eastern Laser Water cooling system:
1. Water circulating pump keeping the chiller in low operating cost and low noise level.
2. Use widely in overseas markets, enjoying extremely high occupation rate of market and reputation.
3. The temperature of the water can be controlled to be between the working environments to 10°C higher than it.
4. Perfect after-sales service. Warranty: 12 months.
5. Excellent specialization in thermolysis, splendid performance of cooled radiator.
6. High performance cost, energy saving.
7. Easy installation and operation.
8. Easily movable.
9. Economic Cooling Laser equipment
Eastern Laser versatile SGS laser engraving machine is a high-tech equipment for laser processing (cutting, marking and engraving) of various materials. The main advantage of this SGS laser machine is equipped with a digital camera from Japan, installed next to the laser head. SGS laser machine features optical image pattern recognition along with the implementation of a function of laser processing of material.
The principle function of the OCR in the laser machine is simple: The digital camera captures the image on the computer screen connected to the laser machine. The operator selects the object of a laser machine for laser engraving. The laser machine will recognize all the contours of the object, and offers selection for them. The operator selects the desired laser machine circuit, if necessary, makes his adjustment, and sets the processing parameters.
Also, the SGC laser machine can be used as a conventional laser cutting machine and does not require optical character recognition, such as “laser engrave plastic”, leather, fabric, plywood, wood, etc. In addition, this laser machine can be used as a laser engraver for the application of high-precision engraving on the processed material. Laser machines are equipped with a series of SGC cell (cellular) table with a special portal that allows for stretching the material along the axis Y, which provides the ability to handle material of any length. In this case, laser machines are not equipped with a series of SGS mechanism for lifting / lowering of the desktop. Also, laser machines have a series of SGS-piece housing, which makes it impossible to disassemble the machine on the part of the laser.
Furthermore, Laser machines are equipped with a series of SGC smoke removal system, installed under the mobile (cellular) table of laser machines. Smoke removal system ensures the safety of the production, the health of the operator as well as other people nearby.
The basic package of SGC laser engraving machine includes a 60W laser tube. Laser machines are equipped with a series of SGC power adjustment for the laser beam, which allows the operator to control the power of the laser machine with both manual and automatic modes
China laser machine manufacturer Eastern Laser newly announces the release of its latest generation laser cutting system applicable to customers in the aerospace, automotive, composite cloth, leather, fabric toy, computerized Embroidery cutting, electronics and industrial fabrics industries.
The experienced engineering team of Eastern Laser has designed a dual configuration laser system equipped with dual cutting heads, which is named ETD1280; ETD1280 laser cutting machine is equipped with two cutting heads so that the processing efficiency will be doubled; it is especially suitable for the mass cutting and engraving of appliqué embroidery. This technology will minimize any associated switchover time between material cutting requirements. Laser cutting is beneficial for fabrics that require fused edges to prevent fraying. The dual-laser and blade cutting system will provide unprecedented opportunities to Eastern Laser customers, allowing them cutting capabilities for a greater variety of materials and applications.
The Eastern Laser static table is a single to low-ply cutting system that provides superior cutting performance and increased throughput. Automated cutting systems offer optimum material yields while reducing labor and operating costs.
Main features of ETD1280 laser cutting machine:
Two-laser heads work together to improve working efficiency
Adopt imported UK joint axletree set which adjust the tool automatically
Step motor import from Germany
64 bits DSP chip and automatic off-line control system
Six balanced straight-line guide tracks from Japan
Laser lens imported from Singapore completely
Chinese-English LCD manifestation mold a combination
Laser of constant temperature with cool package
Details of ETD1280 laser cutting machine
Engraving area: 1200X800mm
Laser power: 30W-150W
Engraving speed: 0-1500mm/min
Cutting speed: 0-800mm/min
Repeating locating: ± 0.05mm
Moving system: CNC control system
Cooling mode: Water-cooling and protection system
Power supply: AC220V, 50Hz
Location precision: < 0.01mm
Gross power: < 1250W
Operating temperature: 0~45 C
Operating humidity: 5-95%(free of condensed water)
Graphic format supported: BMP, GIF, JPGE, PCX, TGA, TIFF, PLT, CDR, DMG, DXF
Gross weight: 270KG
Eastern Laser newly launches ETK-6040 laser cutter for the advertisement industry. ETK-6040 laser cutter includes a precise rotary device and an auto lifting platform that also make it an efficient laser engraving machine.
This multi-featured device can be ideally used for both engraving and cutting purpose. It is compatible with regular as well as irregular planer and round objects such as cylinder, cup, and box with varied thicknesses.
Acrylic plays a vital role in the advertisement industry. After the introduction of laser cutting machine, the ‘Laser cut acrylic’, which was previously a complicated technique has been simplified. Eastern Laser’s ETK series machines were therefore launched in order to make the advertisement processing easier. The operation of ETK-6040 laser cutter is based on a high precision linear encoder, wherein each step of laser machine has been precisely controlled followed by rectification and adjustment even for the minor excursion of movement. Furthermore, the machine’s unique automatic movement compensation function ensures better cutting, providing the finished products with a smoother surface.
Eastern Laser’s ETK-6040 laser cutter product features are:
ETK series laser cutting and engraving machine favors CorelDraw, AutoCAD, and even other image processing software. In addition, it includes superior color management, allowing combination of any different colors; it ensures engraving in freely defined sequence, total or partial output within a single instance.
ETK series laser cutting and engraving machine is ideally used for cutting non-metal materials like organic glass, rubber, plastics, leather, bamboo, ceramic tile, and crystal, jade, wood. It can effectively engrave round quadrate objects like cylinder, cup, tea box, etc.
ETK series laser cutting engraving machines rely on Japan linear guide rail, for precision cutting.
This machine, when equipped with the optional auto lifting platform, ensures efficient engraving for varied thicknesses materials.
ETK series is based on internationally advanced DSP control technology.
Optional integration with precise rotary system enables engraving regular and irregular round or planer objects.
Acrylic is one of the most popular materials to engrave using a laser system. It engraves and cuts very easily, come in a wide variety of shapes and sizes, and can be relatively inexpensive. ETC-960 is highly computerized laser engraving machine and is ideal for “laser engrave acrylic”. The machine enjoys the function of sloping control to make the small letters and precise which can be the same effect as traditional Gravure Printing. It is the good replacement for the high cost resin plate therefore helps to decrease the cost greatly and to enable the packaging and printing company more competitive!
Acrylic is a top performer in the laser engraver. The laser cuts clean smooth edges with no burn or singe marks. Laser engraved acrylic does have a buildup of white dust or burnt ash in cracks and crevices. This dust can be blown away with compressed air or lightly brushed away with soft-bristled brushes. Do not use any harsh solvents or window cleaners to clean the surface. We recommend a mild soap or cleaners designed specifically for acrylic or plastics. For those who wish to use a solvent weld or gluing method, we recommend annealing acrylic prior to applying the solvents to avoid a problem called crazing (small micro factures in the edges of the cut that become visible when applying solvents to the acrylic). For a minimal additional charge Working Widget Technology does offer an annealing service, available at checkout.
Main features of ETC-906 laser engraving machine:
Combined computer control with precise machinery, DSP digital control technology and USB data transmission technology;
Digital controller achieves the full slope function;
Delicate and precise printing effect.
ETC-960 laser engraving machine is mainly applied to cut conducting PET film of touch screen and plastic & rubber panel in IT industry. It is also widely used in processing industries of large-scale engraving and cutting, such as clothing and leather, packing and plate making, handicraft, advertisement and decoration, and construction and fittings